Artificially subjecting material to far more servere conditions than normally in order to predict behaviour during natural ageing
A general chemical term relating to a particular family of thermoplastic resins
Pressure Sensitive Adhesive based on high strength acrylic polymers; Can be coated as a solvent or emulsion system.
General characteristics of an adhesive when analysed in given conditions.
Adhesive surplus appearing on the edge of a roll, or label. Can have different causes.
see "Adhesive Bleed"
Association des Fabricants Europeens de Rubans Auto-adhesifs. European Association of self adhesive manufacturers
Refers to the relative position of the printing and die-cutting units of a label press
Product that allows to remove quickly graffitis
Tape designed to assist in the protection,application and transfer of unprinted die-cut pressure sensitive decals.
Starting from that recommended temperature to apply the product.
American Society for Testing Materials
Pressurized steam heated vessel used for sterilization procedures
Protective material on the back of the PSA. It protects the adhesive side of a PSA while it is not applied
Light box where light is diffused from the inside in order to enhance the color of the image.
see "Adhesive Bleed"
Biaxially Oriented Polypropylene
Material on which the adhesive is coated generally on both sides
Coated paper dried under pressure against a polished cylinder in order to produce a high gloss enamel like finish
Plastic material manufactured by the casting process, as opposed to the extruding process
Resistance of a pressure sensitive label to the deteriorating effect that could result from exposure to specified chemicals
Characteristic of an adhesive to be colourless and transparent
Cyan Magenta Yellow Black : the process colours used when producing colour illustrations
Quantity of adhesive coated on the material
Ability of an adhesive to withstand forces applied in the same plane as the PSA
Colour Management System
Controlled conversion between the colour representations of various devices ( scanners, digital cameras, TV screens, printers), and corresponding media. See also ICC profiles
To duplicate the hue value and intensity of given colour sample by means of blending in specified colours.
A plotter device is conneced to a computer in order to cut shapes in a face material
Ability of a face material to be printed by computer driven printers
Two or more mixed monomers which, when polymerized, yield a complex product having properties different from either single polymer alone
An electrical discharge is used to raise the critical surface tension of filmic materials in order to enhance printability
The lateral movement of a self-adhesive label after application due to low cohesive strength of the adhesive
The tendency of a material to curl in a specific direction. A condition generally aggravated by conditions of humidity
Deep freeze adhesive
Adhesive that will induce a bond to cold surfaces in cold environment
The partial or complete separation of the layers making the laminate
Action of cutting through a required number of layers a required shape
A backing material having a release coating on both sides with one being stronger than the other
Characteristic of a material indicating its ability to remain at given dimensions in spite of varying prevailling conditions such as heat or humidity
Surface coated with a substance which turns black in the immediate areas where heat is applied
Device that feeds self adhesive labels ready for application.
Dots per inch (DPI)
Measurement which refers to resolution, sharpness or clarity of a printer, monitor or other output device
Double sided adhesive
Self adhesive coated on both sides in order to bind two elements
European Article Numbering system. The internation barcode system for retail food packages
Electronic Data Processing
Adhesive that is to be dispersed into water.
A gradual decrease in colour brilliance caused by exposure to UV rays
Facility to disseminate a flame
Property of face material measured in specified conditions to determine how readily they will conform to curved surfaces
Glassine backing paper
Protective liner made of glassine paper
High Density Polyethylene
High speed release
Force needed to separate the face material from its liner in high speed conditions
Hot melt adhesive
Adhesive coated thanks to its faculty to obtain the required viscosity by heating it up
Degree of moisture. Compares the quantity of water in the air to the quantity of water it should take to saturate (relative)
International Color Consortium is an industry consortium which has defined an open standard for a Color Matching Module (CMM) at the OS level
see 'quick tack'
Kraft backing paper
Protective liner made of kraft paper
A clear plastic film is bonded with adhesive to a printed web to both enhance the appearance and add protection.
Element in a PSA that protects the adhesive before it is applied
Ensures print tones evenly throughout the scale to obtain consistent colour result and good tone.
Low speed release
Force needed to separate the face material from its liner in low speed conditions
The phenomena whereby a material retains a memory of its original dimension and returns to it after tension has disappeared.
Taking of the skeleton of face material around the die cut labels
Constituent of oligomers and polymers
see "Adhesive Bleed"
Standard colour guides enbling the designer to describe colours for reproduction
When specified areas are required to be coated or areas are to be left clear of adhesive.
Force needed to separate a PSA after it has been applied on a substrate
Peel 24 H on glass
Force needed to separate a PSA after it has been applied on glass during 24H
see "removable adhesive"
Adhesive intended to stay permanently applied
Molecule chain made up of smaller units (monomers and oligomers)
Collective term used to describe the properties required of all components needed in the printing process
Pressure Sensitive Adhesive. Generally composed of a Face material - an adhesive and a siliconed protective liner
Gives a measurement of the initial grab of a PSA. Also called "loop tack" as a strip of the material is placed in a loop and enters in contact with a specified substrate
Colour coding system mainly used in paints.
Set of horizontal lines composed of individual pixels
Conversion of image data into pattern of dots usually performed by an imagesetter.
Maintaining in position of the various elements of a printed design
Force required to separate the face material of a PSA from its protective liner
Adhesive intended to be removed after a certain time
Raster Image Processor. Part of an output device that rasterizes information so that it can be reproduced on paper or film
Adhesive made of synthetic rubber resin
Temperature range within it is recommended to use the PSA.
Reduction in size of a self adhesive face material
Unique polymer system which can be a very effective release coating
Equipment to cut a reel and rewind this divided reel in separate reels
The resistance of a printed ink to smearing
Solvent based adhesive
Adhesive that is dispersed into organic solvent
Flat plastic tool used to apply large format self adhesive film
Under close examination strings of adhesive can be observed
Generic name used to describe the material on which the Self Adhesive is applied on, and sometimes by confusion the Self Adhesive itself
The feeling of stickiness obtained when the surface of an adhesive is touched or when a label is applied to surface and quickly pulled away
Tamper evident labels
Labels that after application will fragment or split when removal is attempted
Property of a material that is measured by the force required to tear it under specific conditions
Force required to break a piece of material by pulling it under controlled conditions
Mechanical control of material in roll form between unwind and rewind stations. The condition caused by a force to extend, stretch or pull apart
Printing process consisting to drive printheads that melt spots of dry thermoplastic ink from a donor ribbon and transfer them to a receiver to produce an image.
A surface coating to a material designed to improve ink key or opacity or prevent migration or other properties
A thin clear coating made up from a mixture of natural and synthetic resins and drying oils. It may be applied on the printed material in order to increase protection or appearance
A synthetic material also known as PVC (PolyVinyl Chloride)
Resistance to flow. It is measured by recording the time it takes to pass through a regulating hole.